hvjg2578 于 2024-09-03 发表在 教程 大约9757个字

虚拟机磁盘大小变更后的Ubuntu动态分区调整

家人们，今天我们来分享一下关于虚拟机磁盘大小变更后，在Ubuntu操作系统中如何进行动态分区调整的技巧。随着虚拟化技术的发展，虚拟机已经成为许多开发者和系统管理员的首选工具之一。在使用虚拟机过程中，可能会遇到需要扩展磁盘容量的情况，而Ubuntu作为一种常见的操作系统，我们将介绍如何动态调整分区以适应磁盘大小的变更。

pv、lv、vg 介绍
PV（Phsical Volume，物理卷），PV是VG的组成部分，由分区构成，多块盘的时候，可以把一块盘格式化成一个主分区，然后用这个分区做成一个PV，只有一块盘的时候，可以这块盘的某一个分区做成一个PV，实际上一个PV就一个分区。
VG（Volume Group， 卷组），有若干个PV组成，作用就是将PV组成到以前，然后再重新划分空间。
LV（Logical Volume，逻辑卷），LV就是从VG中划分出来的卷，LV的使用要比PV灵活的多，可以在空间不够的情况下，增加空间。
可以说成是PV就是硬盘,而VG就是管理硬盘的操作系统,而LV就是操作系统分出来的各个分区. PV->VG->LV-> 文件系统使用(挂载到某个目录) 硬盘或分区做成pv，然后将pv或多个pv建立vg，vg上建立lv,其模型如下

命令集合

PV

pvcreate :根据物理盘,创建pv

pvscan :查询目前系统里的pv

pvdisplay:显示pv的状态

pvremove:将pv属性移除

VG

vgcreate:创建vg

vgscan:查找当前系统里面的vg

vgdisplay:显示当前系统vg的状态

vgextend:给vg添加额外的pv

vgreduce:在vg内删除pv

vgchange:设置vg是否是启动状态(active)

vgremove:删除一个vg

LV

lvcreate:创建lv

lvscan:查询当前系统的lv

lvdisplay:显示lv的属性

lvextend:给lv添加容量

lvredurce:给lv减少容量

lvremove:删除一个lv

lvresize:对lv大小的容量进行调整

实战案例
查看文件系统的磁盘空间使用情况
df -hl

Filesystem                         Size  Used Avail Use% Mounted on
tmpfs                              791M  2.2M  789M   1% /run
/dev/mapper/ubuntu--vg-ubuntu--lv   38G   26G   11G  72% /
tmpfs                              3.9G     0  3.9G   0% /dev/shm
tmpfs                              5.0M     0  5.0M   0% /run/lock
/dev/sda2                          2.0G  253M  1.6G  14% /boot
tmpfs                              791M  4.0K  791M   1% /run/user/1000
可以看到 / 由 /dev/mapper/ubuntu--vg-ubuntu--lv 挂载
  1. 创建分区 sda4，将设置为 lvm 类型：

sudo fdisk /dev/sda

xiuji@xiuji:~$ sudo fdisk /dev/sda

Welcome to fdisk (util-linux 2.37.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

GPT PMBR size mismatch (83886079 != 209715199) will be corrected by write.
This disk is currently in use - repartitioning is probably a bad idea.
It's recommended to umount all file systems, and swapoff all swap
partitions on this disk.



Command (m for help): p

Disk /dev/sda: 100 GiB, 107374182400 bytes, 209715200 sectors
Disk model: VMware Virtual S
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: D80D8A91-AB36-4BB8-A669-783F46148D68

Device       Start      End  Sectors Size Type
/dev/sda1     2048     4095     2048   1M BIOS boot
/dev/sda2     4096  4198399  4194304   2G Linux filesystem
/dev/sda3  4198400 83884031 79685632  38G Linux filesystem

Command (m for help): n
Partition number (4-128, default 4): 4
First sector (83884032-209715166, default 83884032): 83884032
Last sector, +/-sectors or +/-size{K,M,G,T,P} (83884032-209715166, default 209715166): 104857583

Created a new partition 4 of type 'Linux filesystem' and of size 10 GiB.

Command (m for help): p
Disk /dev/sda: 100 GiB, 107374182400 bytes, 209715200 sectors
Disk model: VMware Virtual S
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: D80D8A91-AB36-4BB8-A669-783F46148D68

Device        Start       End  Sectors Size Type
/dev/sda1      2048      4095     2048   1M BIOS boot
/dev/sda2      4096   4198399  4194304   2G Linux filesystem
/dev/sda3   4198400  83884031 79685632  38G Linux filesystem
/dev/sda4  83884032 104857583 20973552  10G Linux filesystem

Command (m for help): t
Partition number (1-4, default 4): 4
Partition type or alias (type L to list all): lvm

Changed type of partition 'Linux filesystem' to 'Linux LVM'.

Command (m for help): p
Disk /dev/sda: 100 GiB, 107374182400 bytes, 209715200 sectors
Disk model: VMware Virtual S
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: D80D8A91-AB36-4BB8-A669-783F46148D68

Device        Start       End  Sectors Size Type
/dev/sda1      2048      4095     2048   1M BIOS boot
/dev/sda2      4096   4198399  4194304   2G Linux filesystem
/dev/sda3   4198400  83884031 79685632  38G Linux filesystem
/dev/sda4  83884032 104857583 20973552  10G Linux LVM

Command (m for help): w
The partition table has been altered.
Syncing disks.
  1. sda4 创建成功，查看所有可用空间：

sudo lsblk

xiuji@xiuji:~$ sudo lsblk
NAME                      MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
loop0                       7:0    0  63.4M  1 loop /snap/core20/1950
loop1                       7:1    0  53.3M  1 loop /snap/snapd/19457
loop2                       7:2    0  53.3M  1 loop /snap/snapd/19361
loop3                       7:3    0  63.5M  1 loop /snap/core20/1891
loop4                       7:4    0 111.9M  1 loop /snap/lxd/24322
sda                         8:0    0   100G  0 disk
├─sda1                      8:1    0     1M  0 part
├─sda2                      8:2    0     2G  0 part /boot
├─sda3                      8:3    0    38G  0 part
│ └─ubuntu--vg-ubuntu--lv 253:0    0    38G  0 lvm  /
└─sda4                      8:4    0    10G  0 part
sr0                        11:0    1   1.8G  0 rom
  1. 将 sda4创建成 PV(Physical Volume)：

sudo pvcreate /dev/sda4

xiuji@xiuji:~$ sudo pvcreate /dev/sda4
  Physical volume "/dev/sda4" successfully created.

sudo pvdisplay

xiuji@xiuji:~$ sudo pvdisplay
  --- Physical volume ---
  PV Name               /dev/sda3
  VG Name               ubuntu-vg
  PV Size               <38.00 GiB / not usable 0
  Allocatable           yes (but full)
  PE Size               4.00 MiB
  Total PE              9727
  Free PE               0
  Allocated PE          9727
  PV UUID               qtpZ00-5KSl-HJr3-GCcf-Ki6B-eQP8-pcO6oH

  "/dev/sda4" is a new physical volume of "10.00 GiB"
  --- NEW Physical volume ---
  PV Name               /dev/sda4
  VG Name
  PV Size               10.00 GiB
  Allocatable           NO
  PE Size               0
  Total PE              0
  Free PE               0
  Allocated PE          0
  PV UUID               eKegVq-phGh-jZ51-p08D-go8S-fFvt-8DLU62
  1. 查看当前 VG

sudo vgdisplay

xiuji@xiuji:~$  sudo vgdisplay
  --- Volume group ---
  VG Name               ubuntu-vg
  System ID
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  3
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                1
  Open LV               1
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               <38.00 GiB
  PE Size               4.00 MiB
  Total PE              9727
  Alloc PE / Size       9727 / <38.00 GiB
  Free  PE / Size       0 / 0
  VG UUID               vy0kkj-d2tU-Izec-RFY0-1Nmx-cReb-3Kx2S7
  1. 将 PV 添加到 VG

sudo vgextend ubuntu-vg /dev/sda4

xiuji@xiuji:~$ sudo vgextend ubuntu-vg /dev/sda4
  Volume group "ubuntu-vg" successfully extende
sudo vgdisplay
xiuji@xiuji:~$ sudo vgdisplay
  --- Volume group ---
  VG Name               ubuntu-vg
  System ID
  Format                lvm2
  Metadata Areas        2
  Metadata Sequence No  4
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                1
  Open LV               1
  Max PV                0
  Cur PV                2
  Act PV                2
  VG Size               47.99 GiB
  PE Size               4.00 MiB
  Total PE              12286
  Alloc PE / Size       9727 / <38.00 GiB
  Free  PE / Size       2559 / <10.00 GiB
  VG UUID               vy0kkj-d2tU-Izec-RFY0-1Nmx-cReb-3Kx2S7
  1. 块设备（block devices）的信息

sudo lsblk

xiuji@xiuji:~$ sudo lsblk
NAME                      MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
loop0                       7:0    0  63.4M  1 loop /snap/core20/1950
loop1                       7:1    0  53.3M  1 loop /snap/snapd/19457
loop2                       7:2    0  53.3M  1 loop /snap/snapd/19361
loop3                       7:3    0  63.5M  1 loop /snap/core20/1891
loop4                       7:4    0 111.9M  1 loop /snap/lxd/24322
sda                         8:0    0   100G  0 disk
├─sda1                      8:1    0     1M  0 part
├─sda2                      8:2    0     2G  0 part /boot
├─sda3                      8:3    0    38G  0 part
│ └─ubuntu--vg-ubuntu--lv 253:0    0    38G  0 lvm  /
└─sda4                      8:4    0    10G  0 part
sr0                        11:0    1   1.8G  0 rom
  1. 调整 LV 占用 VG 的全部空间

sudo lvextend -l +100%FREE /dev/ubuntu-vg/ubuntu-lv

xiuji@xiuji:~$ sudo lvextend -l +100%FREE /dev/ubuntu-vg/ubuntu-lv
  Size of logical volume ubuntu-vg/ubuntu-lv changed from <38.00 GiB (9727 extents) to 47.99 GiB (12286 extents).
  Logical volume ubuntu-vg/ubuntu-lv successfully resized.

sudo resize2fs /dev/ubuntu-vg/ubuntu-lv

xiuji@xiuji:~$ sudo resize2fs /dev/ubuntu-vg/ubuntu-lv
resize2fs 1.46.5 (30-Dec-2021)
Filesystem at /dev/ubuntu-vg/ubuntu-lv is mounted on /; on-line resizing required
old_desc_blocks = 5, new_desc_blocks = 6
The filesystem on /dev/ubuntu-vg/ubuntu-lv is now 12580864 (4k) blocks long.
  1. 查看文件系统的磁盘空间使用情况

df -hl

xiuji@xiuji:~$ df -hl
Filesystem                         Size  Used Avail Use% Mounted on
tmpfs                              791M  2.2M  789M   1% /run
/dev/mapper/ubuntu--vg-ubuntu--lv   48G   26G   20G  57% /
tmpfs                              3.9G     0  3.9G   0% /dev/shm
tmpfs                              5.0M     0  5.0M   0% /run/lock
/dev/sda2                          2.0G  253M  1.6G  14% /boot
tmpfs                              791M  4.0K  791M   1% /run/user/1000

可以看到我们/dev/mapper/ubuntu–vg-ubuntu–lv调整了10G的大小已经生效了

# Linux
GitHub
×
热门文章
杰作们 CFDL Chuanrui文件目录列表程序 一个简洁好用的个人网盘系统 GitLab 修复GitLab中NGINX无法启动的问题 折腾记 GitLab 配置 邮件服务器 教程 Linux服务器 自建FRP服务器 教程 Conda 环境下安装Jupyter Lab 杰作们 解决宝塔面板SSL证书安装失败： Invalid version. The only valid version for X509Req is 0.
热门标签
Python 5篇文章 bat 3篇文章 批处理 3篇文章 NVIDIA 3篇文章 Jetson nano 3篇文章 Windows 2篇文章